Treffer: Cutting-forces when up-milling in beech

Title:
Cutting-forces when up-milling in beech
Authors:
PALMQVIST, Jan, LENNER, Matz, GUSTAFSSON, Stig-Inge
Source:
Wood science and technology (Print). 39(8):674-684
Publisher Information:
Berlin: Springer, 2005.
Publication Year:
2005
Physical Description:
print, 9 ref
Original Material:
INIST-CNRS
Subject Terms:
Polymers, paint and wood industries, Polymères, industries des peintures et bois, Sciences exactes et technologie, Exact sciences and technology, Sciences appliquees, Applied sciences, Industrie des polymeres, peintures, bois, Polymer industry, paints, wood, Bois. Papiers. Non tissés, Wood. Paper. Non wovens, Bois, Wood, Traitements mécaniques et séchage, Mechanical woodworking and drying, Angiospermae, Dicotyledones, Fagaceae, Spermatophyta, Bois feuillu, Hardwood, Madera de frondosas, Copeau bois, Wood chip, Viruta madera, Epaisseur, Thickness, Espesor, Etude expérimentale, Experimental study, Estudio experimental, Fagus, Force coupe, Cutting force, Fuerza corte, Mobilier, Furniture, Mobiliario, Traitement informatique, Computerized processing, Tratamiento informático, Usinage, Machining, Mecanizado
Document Type:
Fachzeitschrift Article
File Description:
text
Language:
English
Author Affiliations:
Department of Mechanical Engineering, Institute of Technology, Wood Science and Technology, 581 83, Linköping, Sweden
ISSN:
0043-7719
Access URL:
http://pascal-francis.inist.fr/vibad/index.php?action=search&terms=17310119
Rights:
Copyright 2006 INIST-CNRS
CC BY 4.0
Sauf mention contraire ci-dessus, le contenu de cette notice bibliographique peut être utilisé dans le cadre d’une licence CC BY 4.0 Inist-CNRS / Unless otherwise stated above, the content of this bibliographic record may be used under a CC BY 4.0 licence by Inist-CNRS / A menos que se haya señalado antes, el contenido de este registro bibliográfico puede ser utilizado al amparo de una licencia CC BY 4.0 Inist-CNRS
Notes:
Polymer industry, paints, wood
Accession Number:
edscal.17310119
Database:
PASCAL Archive

Weitere Informationen

By use of a load cell, a computer and a fast scanning device we have examined the cutting-forces on the tool in a milling machine. Several experiments have been elaborated with different rotation and feeding speeds. The aim is to study, in detail, how wood chips are produced. By a better understanding of this process it must be possible to manufacture wooden details for furniture and other products with minimal errors and, hence, there will be reduced need for sanding and other expensive extra treatment in order to achieve an acceptable result of the finished surface. The load cell was used to register the forces in three directions. These registrations, however, were not easy to interpret because of the vibrations which were introduced in the experimental setup when milling started. A computerized filter therefore had to be used in order to extract only those registrations which were of interest. We found that the cutting forces in beech varied from approximately 40 up to 86 N/cm in the work-piece feed direction, i.e., in the Y-direction, and from about 14 to 51 N/ cm in the X-direction, i.e., in the normal to the cut surface. A larger average chip thickness resulted in larger forces but we could not find a clear relationship which, in full, explained our result.